T1000 S (2014) version

Description

T1000 S (2014) version

T1000 S (2014) version controller is the best low price programmable controller in market

Description:
Memory card:

type: SD card

Capacity:256MB-2GB

Store file:*.led

Physical parameters:

Working temperature:-30-85degree celsius

Working voltage:DC5V / DC7.5-24V

Working power:2W

Weight:0.3kg

Size: L165mm×W80mm×H30mm

Signal port:3pin connect port

T-1000S System features
1.32-65536 Gray, Support software Gamma correction.

2.Support point, line, surface, rules, and special-shaped handle.

3. Single-port output can support 2048 pixels.

4. Multiple controllers can be cascaded together and work synchronous,

playback content stored in the SD card.

5.Compatible with a single line or double line chips.

NOTE:

When the T1000S controller loads less than 512 pixels the frame rate can reach 30fps.

When T-1000s control more than 512 pixels the frame rate will slow down automatically.

 

Support IC (one IC symbolize a pixel point )

 

  

 

 Definition of buttons

 

Features:

1. 256 Gray, Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. The controller, a port output, may bring 1024/2048 light.
4. Off-line control, playback content stored in the SD card
5. T-1000C store a maximum of 16 documents
Note: The model T-1000S with one port output, When it controls 512  pixels the speed can reach 30fps, more than 512 pixels, the frame speed will be slow down automatically

Connection diagram:

Regulatory function button: 

System architecture diagram:

 

Specific parameters:
Memory Card:
. Type: SD Card
. Capacity: 128MB-2GB
. File Format: FAT file format
. Store files: *.led

Physical parameters:

. Weight:0.2kg
. Size:122mm*67mm*25mm
. Temperature:-40-85 Degree
. Voltage: DC5V / DC7.5-24V
. Power:3W

 

Note:
To copy files to SD card, you must first format to the SD card, pay attention to is that each copy must be formatted before.
SD card must be formatted as “FAT” format.

NOTE: For the TTL(SPI) signal, the controller signal ground must connect to

the LED lamp ground directly.

Two type of connection in pixel led

1. S Type           

2. Z  Type